Brief fitting guide:

1. Once the turf has been removed and leveled the pre-made rubber putting green base can be fitted in position. Once complete, the hole cups are fitted.
2. A geo-tex weed membrane is fitted over the whole site that is to be covered by the putting green and the LazyLawn fringe area.
3. The putting green surface is installed first, followed by the chosen LazyLawn fringe surface, which is then carefully cut around the putting green and into any perimeters.
4. The area is then sand dressed to hold the surfaces in place.

Related pages
Synthetic Putting Greens

• Skip to main content
• Skip to main menu